Thank you all
This is a new long block with new dampner and accessories
I was told by pdi and pittsburgh power to push the sections together and then make sure I had space between stud and manifold hole sides so with...
I keep breaking exhaust studs on a 1997 6ts 3406e I tried stainless studs had one break I went back with factory gaskets and studs with all new...
Thanks I had not thought of that
I have a 97 pete 379 my cruise is kicking off. I replaced the switch at the clutch arm last year. Could it be bad again if so is there a cheaper...
Same ecm I just went back and checked all the connections everything looks good. I have two speed sensors on the Trans. And I put in a new sensor...
I just pulled my 3406e cat out of a 1997 379 pete and dropped in a Long block from cat. I replaced all of the sensors but when I cranked it the...
Thanks for the information
Thank you I might be able to get some sleep now.
I went out and cranked it again with exhaust elbow off the turbo the oil is still building up and running out. Do I just need to run It like you...
I have just put a new 3406e cat long block in a 1997 379 pete I replaced everything on the engine with new parts including the turbo. I just...
At 90 to 95 degrees F with 90 % Humidity what should the low and high side gauges read for optimum cooling
Thanks for the help
Does the polarity of the wires matter on the flywheel sensor on a 3406e cat in a 97 379 pete. The truck has a red and black wire but the new...
What is the best fuel card for deep discounts at love's. How many cents off per gallon are possible
I have a 1997 pete with 3406e can I use either port on the back of the water pump for heater hose position. Can I move the hose outlet from the...
it is a 2003. Rush peterbilt said it was the old style and they could not get "the Code Book"
Does anyone know how to calibrate a speedometer after a rear end change. I just changed from 3:55s to 2:64s. I have a 18918B trans. with low pro...
Does anyone know the best way to handle broken exhaust manifold studs on a 6nz cat. Ive got one wrung off even with the head
