[ATTACH] Cow hauler humor
It takes something with some sand to take the true test of time…..you gotta perform in all conditions not shine well in a few. Some will say...
I may know the guy that put him up to that
Look up the tube with the motor off, or pull a valve cover I’ll bet you find sludge. Either way it’s time to do something about it
A 400 JWAC had more rack travel than a 425ATAAC. That said it coulda been robbed from anything to go anywhere. That happens with old stuff. If...
OTC makes a crooked pry bar thing that once you learn how to use it works great
It has a 7W-3906 pump. Long timing advance cone and a JWAC. None of that goes together sorta. By 87 or 8 most everything including the 285hp were...
You need to have a USDOT number, that is exempt for hire. You still need the KYU, HUT, and seems like another state or 2 have their own little...
[ATTACH] Just an ol farm truck tryin to keep up
Seems so silly to make such a big deal out of a clutch pedal…..but I can relate. I won’t drive anything but a Pete because I hate a hung or...
Yes then draw file the whole business flat.
I usually go about a 1/4 deep on the rings. They will need a counter bore tool for a 3400 series block. The ring will be roughly the same width as...
The rings are no thicker than a shim. I have cut existing rings for a shim after they wear. You can see the lines in that block if you really blow...
[ATTACH] Finished product of last one I had rings built for. You set up on it and cut it, a machine shop builds the inserts. Then you put...
I would steam the piss out of it. If the lower bore itself is good but just the beveled transition itself has a spot on the thrust side I would...
To base a decision off of which is cheaper to overhaul is setting yourself up for failure. There are lemons in all of them, however how they are...
I used to know this ol outlaw lived on the side of US 67 halfway between the old Sanatorium and the Girl Scout camp. Had a house full of youngins...
For what it’s worth I started with a 3ZJ block with a broken crank. By time I put the block back square top and bottom, new head, rocker shafts,...
If it were me I would really think about doing the lower bores. I’d pull a draw file across the top and counterbore it if nothing else. Being a...
[ATTACH] Hard to keep one clean workin for a livin