Leveling valve was indeed bad, thanks for that info. Also found a crack under fifth wheel plate so getting ready to pull fifth wheel and slider...
No this is doing it constantly, stopped or going down road.
So bit of a update, vibration came back feeling it mostly in the floor. Clutch no vibration what so ever. Been tinkering with it hear and there...
Thank you sir, I appreciate the info and if that happens I will definitely ask away. Thanks guys, be safe out there.
Thanks guys I appreciate the info. I will definitely check out the one piece bushing as well. I did find that the slip yoke was about one tooth...
Thanks man I will definitely check that. Shop I had it done at was supposed to put all new u joints in when I had rears done, I will check like...
So been chasing a vibration for a bit with my truck, rears were replaced less 6 months ago, 18 spd Eaton trans bout a year old, as well as 2050...
Got backed into on the drivers side of the sleeper bout a month ago, and honestly I don’t stay out like I used to so a 63 will suit me just fine....
I was thinking that in the back of my head but sometimes you need to hear someone else say it lol. I think I’ll just sell that sleeper and find...
Hey guys, tried doing some research but I’m coming up blank. I want to take my 70in sleeper off my 379 and replace it with a 63in. A friend has a...
Did the 12 gauge kit on mine in my shop, one leaf and remove all the spacers and blocks. I’ve had the kit for over 2 years no problem. Only thing...
Thanks guys, a bad ground hadn’t even occurred to me.
Got a 2010 386 peterbilt that I’m having a weird issue with I can’t seem to figure out. So when you flip the turn signal switch to the right on...
Thanks Triplesix, I’m gonna go with a 2050 trans for right now just because a friend has a reman Weller and will take mine as a core so it will...
Thanks pushbroom, that’s prob what I’m gonna go with again and a 2050 easy pedal clutch like I’ve had in her. I figured I’d ask for some input...
Pretty sure the top two gears in my transmission are on the way out. Makes a internal grinding noise only in that gear, it’s the 1850 18spd model....
My ride is my avatar. 2004 379, 300 in wheelbase with 12 gauge air ride front end. MBN cat, just rebuilt with 211-3025 injectors and 1000hp marine...
I will definitely try that, I usually run 100 to 105 in my drives since they are low pro but I will bump them to max psi this weekend. I will say...
Thanks Swann, I’ll try that. I was worried bout the one spring at first but the 389 with factory air ride only hv one spring so I hv kinda learned...
I usually run between 95 and 100psi on the steers, and I check my tire psi every week. Thanks for the reply
