Drivers girl, thanks for mentioning us, however we are not currently hiring as we are at 100%, the service dog wouldn't be an issue for us...
most mega companies require 1 year recent otr to hire and blame it on insurance requirements, even when they are self insured. you have to be...
Samsung Galaxy note 2 works great for this... I run elogs, DAT boards, Google earth / maps with sat images of my delivery points.. email with load...
80% on time delivery.... if your only working 8 hours a day then your not doing your job, and you may soon find yourself without one. If your...
Found out it was the connector on the bottom of the turbo actuator valve control box thingy under the compressor(not sure what it's called but I...
this is what mines was doing... then it progressed to both tanks doing it. Found out it was the connector on the bottom of the turbo actuator...
didn't mean to come off so rude... sorry about that... Just seems this is a strange one to figure out because we've tried all the standard checks...
must be missing something in your reply. this has already been do when visually and audibly checked everything for leaks. spent 4 hours crawling...
thanks for all the info.... when I say I took it to some people to check these are the things they checked. Turbo Actuator, actuator line and...
spitter? you mean the purge valve, heater wire is connected, i will double check everything again.... please keep giving me ideas, anything helps...
tried checking it this way but no audible leaks. what should i check in/on dryer? this started after we replaced the dryer with a brand new one
just replaced fan clutch 3 days ago. still happening
my truck was doing this and found out it was the fan clutch starting to go bad... it finally went out going up a hill and failed in the locked off...
I have a 9400i with Cummins ISX. While idling the truck will build pressure to 120, purge and remain at 120. randomly the truck loses pressure...
sorry I haven't replied to this thread in a while, We currently have all trucks full and we aren't hiring at this time.
thanks heavy, I just had it in the shop a couple of weeks and they couldn't find anything. It happened again where I pulled into a shipper...
okay, got the ac fixed and it is extremely cold in here now.... We had to replace the Expansion valve as it had a broken section on the high...
okay got the valve off, had to get my dremel out and cut the bolt heads off. The only problem now is I cant get the bolts out of the piece of...
The bolts are recessed into the expansion block. I have a Ryobi one jobplus I was thinking about using but wasn't sure if I should try and cut the...
Cab lizard is right on the location... and No this truck does not have a Oriface tube, already had Int dealer pull the build schematics on the...
