Some of us use both. I’ve even heard some guys pour their used oil in their fuel tanks for the same purpose. If I had a way to keep 10 gallons of...
Adding atf or other oils to diesel puts lubricants back in the fuel that is taken out when they make it ulsd. Also helps clean injectors
Guess I made that sound like I’m using the 1lw now. Dad had one in a w9 up till he sold it last year with just shy of 2 million miles so it’s...
Not to worried on the crank. I switched it to the accert on its last build. Other cranks will fit right in also. 5ek is alright if you don’t crack...
I don’t have a problem with heat anymore but in the winter time I wish I still had the other pump. If outside temps are below 50 I’m running a...
You’re right. I do like it. But I really do try to light foot it and keep my boost down
Holding up real good. My biggest worries are tearing a driveline out so I just try to drive it like an old man. But I still end up passing...
Gear lash should be set every time the head is pulled. My first thought when reading this was the gear lash. I always set it between .005 and .008...
Not all of us have hand primers. I always fill mine. I have even chunked a new filter after I filled it cause I didn’t trust the fuel I used was...
2ws is the better block for the dollars. I’d rather have a 2ws or 1lw just cause of the price difference between them and the 6nz. They are still...
That's a no no gear. Get out of the habit of using it
You don't turn it over while you pump the primer. When it starts you won't be able to lock it closed and it could blow the piston out of the...
19,500 at half fuel for me
Exactly the reason I'm pulling a hopper again and home every night. Leased my pot out for awhile.
[ATTACH] Here's my profile pic. Back when it still shined. This is 10 years ago. Still drive it everyday just not near as purdy. But still runs...
Not sure why they would be more expensive to work on. They are easier to work on because you have way more room under the hood and not near as...
Yes I did upgrade the t housing. The 2 original ones from both engines I have are both single t stats and I put a double housing on it with the...
That's what I was thinking. Try swapping 1 out first and see how it acts
Can't get the water temp over 190 and it likes to run around 170 on flats. Haven't seen the pyro much over 700 either. That's at 70 degrees...
####. I'm gonna have to go get more.
