I have a cobra 29 with high watt mod. (1989 yr model). Had it all checked out yesterday. Was good to go. Put it in my 379 pete with single k40 on...
I haven't been too big on the led cab lights. I always liked watermelon glass lense with an 1157 bulb. But that was 15 years ago.
I'm going to jb weld the holes left and the holes for the air horns. Adding 2 cab lights as well. I have read a few people did the jb weld and...
My roof cap is aluminum. So use the front mounting holes and drill new ones for rear?
Can I just unbolt the square cab lights on my 1997 379 and replace them with the bullet style? Or do they need new mounting holes?
We have already checked everything else in the driveline and now we're at the clutch. Since we can't get the adjustment to move on the clutch and...
No. I'm going to service the truck tomorrow.. We tried to adjust the clutch but it won't budge. Alot of the vibration goes away when we push in...
Ok thanks.
I have an engine vibration at higher rpms. My balancer and pan were both tan at one time so my father is saying it's got the wrong balancer. It's...
Would it be at the bottom? There are two large threaded holes at the bottom, one straight down and one off to the passenger side at an angle?...
Okay I'm about to go out there and do some work on the truck anyway so I'm going to look it over a real good again and check
Is it on the block? I thought it was on the bellhousing?
I will look on the side in the morning. I can drill and tap a hole. That's not a problem. Just not sure where exactly to put it. Thanks
I just got a 1997 379 with an n14. Previous owner swapped out a broke 18 speed for an older 15 speed with lo-lo. I noticed the tach wasn't working...
Wow, lots of negative here. Its his truck. Let him do as he wants. There is a company in Forth Worth,Tx called Weldon that does these...
