no they are not rebuildable, get the velvac never had a problem
join the club everyone has had problems with it,it is probably a different issue, but still urea related
the numbers don't cross to each other, I would say don't use it even if it did fit. the original # changes up to 4309506NX
get the cummins # and cross it to gates, dayco, or goodyear and save a 100 buck while your at it
you could also get screwed on the core charge since there different
could just be a sensor. eop or eps both a known problem with the n14
what about the spinner 2? probably the best set up with the results http://www.spinnerii.com/
yes the road warrior dpfs are worth looking into as long as they can cross the oem # over
all fixed, just a injector hold down bolt.
back together now, but before truck left shop engine developed a weird ringing/whistling sound at a higher then idle rpm. 2-3 seconds of sound...
Detroit only paying for the one hole with the damage, piston, liner, inj, con rod etc. cyl head had no damage. hoping not over heated at any...
what engine? maybe try another dealer and see if its an engine manufactured part, not a peterbilt part?
# 4 liner has 2 cracks opposite from each other, also 2nd piston ring seized and piston skirt is scored up scratching up insides of liner. liner...
Filaw just bought another truck, used star with dd15 approx 400,000 miles, in the shop blowing coolant out the dipstick, and oil out the blow by...
that clutch fork is used on eaton solo clutches. have to change it when going to easy pedal.
you didn't search very hard on the net if you couldn't find any differences. mpg on the dd15 should be better then your s60, but that depends on...
looking for an aftermarket source for the rubber fairing extension that's used on prostars and t700. its about 7 feet long and 6 inches wide and...
we put a lot of miles on so even a small increase would be worth it. cant change muffler cause we have a dpf
don't mean to highjack thread but do you think its worth it to swap out a single 5 inch stack 3 ft long to a 6 inch 3 ft long?. looking for...
dd16 is very close to dd15 just different crankshaft, same block, heads etc they even weigh the same. bore is same stroke is longer, that's why...
