Thank you for your reply. My grounds are white too. The stuff I found online showed these 4 wires to be black on a Detroit diagram. I got it...
Yes it does make sense. Only difference my grounds were white. Got it running. Thank you very much
Took my batteries out to clean and check water. Made myself a sketch of the cables and wire hookups. I forgot one wire on the sketch. It is a...
1996 Detroit Diesel Series 60 370/430 hp International 9200
Took my batteries out to clean and check water. Made myself a sketch of all the cable and wire hook ups. I forgot to mark down one wire. It is a...
Thanks for the info and pictures
I am a one truck, two trailer and one driver (me) owner operator. I do all my own maintenance including brake work. Where are you guys getting the...
I put a lift axle kit on my 99 Big Bubba. Had a small partial load going up over the big mac bridge and was able to leave axle up going across...
Thanks for the info Riprap. I am going to get that set. A screw driver and a open end wrench works ok but I think these will be allot better....
Riprap why does it look like the ratchet has a male 5/16 sticking out instead of just a 5/16" square opening? Or am I just seeing it wrong. Did...
You will get allot of experience working at a farm. In and out of small driveways, muddy slippery conditions, long hours. That is how I got my...
Thanks for all the info. I do have a slide bar on the back of the truck. I am thinking about going with rubber lines. I have never checked into...
Hi all. I am hear every day but don't post much. I pull a flat bed and deliver to small lumber yards with tight turns and my road has a tight...
Had the same thing happen with my S60. Never used starting fluid but I did shut the fuel shut off valve off after each run and open it back up...
About a year ago I put all new s-cam shafts and bushings in my truck. When I tore everything apart I noticed I had way to much grease everywhere,...
I use them on every load on my Reitnouer trailer. I mostly haul wood products, so I usually use them standing straight up. But they can be used...
Heavyd I would like to thank you for helping me out with my gauge problem. I would of never thought to start looking at the ABS Module. I have...
Ussually on a straight axle type front suspension violent shaking after hitting a sharp bump means that it is towed out or not towed in enough.
This is what I did today. I unplugged the abs connectors on the back of the module, then I was able to put the breaker back in the abs slot in...
Thanks Heavyd for the help. Like I said I have not had much time to work on it, but yesterday the tach, speedo and water temp gauge came back. I...
