I demonstrated that the shocks have no damping by simply bouncing the cab by hand next to my friends new 860 to compare. My shocks were very...
Nothing yet haven't tried it on the TC motor
Hello all My 2026 VNL860 cab shocks are poor quality and have zero dampening left at only 33,000 miles causing the cab suspension to hit the...
Does anyone have the solution to this? I keep putting motor after motor into this POS truck and the same "stuttering" happens with the wipers on...
This is my dream
If you have the factory inverter option with shore power option then it keeps everything charged. If you only have shore power option without a...
Hi has anyone confirmed this cap? I'd promptly be removing and installing a bypass filter if this is possible I'm weighing getting the canister...
You can thank the out of control legal system and the scumbag trial lawyers for this. Without the camera protection it makes a slam dunk nuclear...
OMG the gabapentin is extremely bad stuff you don't want to be using this
BINGO there's your answer. Use synthetic oil.
Complete BS. Grease them regularly, normally, don't neglect the greasing is the most important part to remember. Every 5k miles , a few pumps...
Talk to you local shop they usually save their iShift oil from services that have leftovers and will sell you a full bucket for a fraction of a...
I've done this with a blow dryer and few old towels, it does work quickly and little risk of melting :)
Thank you !!!! This is awesome !!
Be EXTREMELY careful with the fuel filter as over tightened will cause failure of the casting and or threaded post. VERY Costly to replace
Takes 24 hours for a refrigerator to stabilize temperature, the top freezer compartment is going to get coldest first. Normal operation on these...
If it's the Hendrickson air, It's critical to add a caster wedge and lower by 1" makes the truck a whole different machine. **When set correctly...
Lack of caster 100% does cause wander and weak return to center
This is really cool !
I'm guessing 13 or 14 speed? If so , that's 100% normal on the "X series" (HD) iShift with hardened gear set
