They do make 200 amp 28SI alternators. But 28SI are brushed-type and IMO not the best. Yours is most likely a PAD-MOUNT style. So just make sure...
It's just a voltage sense wire. This can be easily made to fit the 40SI if you terminate the wire with a ring terminal and install correctly.
These aren't clips--these are the electrical connectors. And these connectors are spec'd in your truck by the configuration that are existing and...
These DEF headers are from a terrible mfger. They don't support their piss-poor product. Just for clarity you need to state whether these are...
Hey OP. Looks like nobody helped you at all. Anyway, I can show you the wiring to this component. Thanks for supplying the VIN. I think there...
New truck? New thread. Post a new thread with the info.
This! And every other mechanic/tech needs to understand the importance of load testing and measuring voltage drop. Good point.
As per the SAMCHAS, a baseline configuration is spec'd to the truck and here is the P/N you can order: [ATTACH]
The only thing I was able to find for this VIN was a campaign that was done for the brake switch--which is completely unrelated. [ATTACH]
Thanks for reporting back. This would be a good start then. We would then need to diagnose the J1939. Being that you're a glider, this might be a...
So yes, this has the ICU4M. It has been known that the daisy-chain pins go bad on the jumper harness. The female pins lose their tension and can...
The OP stated this is a Coronado that is a glider. The Coronado is a 122 SD and does not have a SAMCHASSIS nor SAMCAB. It would have a PDM to...
You're talking about the back of cab air bag and leveling valve relationship? Make sure you're measuring correctly. I'm not sure which exact...
Not knowing your specifics...Typically a new module, actuator, switches, and parameterizing.
Here is what I found for your stock configuration. [ATTACH] [ATTACH] Sometimes the welded mounting point on the rear of the pumpkin breaks off....
If you post last 6 of VIN I can look up what your truck came with stock air suspension with the airing schematic.
Keep us posted.
Hopefully you didn't mess with the dip switches on the back. The back of your tach should be this: [ATTACH] The ECU has the signal for tach...
Couple of things to note: 1. What are you referring to exactly that you need wiring for? This will better help me get to the component. 2. Keep in...
Create your own forum post with the last 6 of vin. Then I can provide wiring diagrams to stock-components that you need.
