I don’t have a scale, but it popped up to the numbers I posted in about 10 seconds. I’ve done my other trucks and we’d add a little at a time but...
Ok. The correct puller arrived. popped the pitman arm off in 15 seconds. I found that if I placed the timing mark at about 1 oclock, and with the...
Ok. I’ll report back.
I’m tying to borrow a puller.
Ok, no go in getting the pitman arm off. My 1/2 inch Milwaukee flex impact, three arm puller and even used the torch on it. didn’t even try to...
I’ll be back at the shop this weekend to work on the steering. We were out of town.
And yep, I’ll take more pictures.
Thank you. I’ll do as you say. As far as the wrong pitman arm, it doesn’t surprise me since the shop that put this assembly on is the same one...
Three and 3/4 steering wheel to the left from center. One and 1/4 steering wheel from center to right.
Timed correctly. Any other ideas that might help? Now i am really lost [ATTACH]
I took the steering off. Here is the rub. When I turn the steering all the way to the left the pitman arm is facing at 9 o’clock facing the front...
Ok. So shorting the high pressure plug didn’t do anything. I also tested the wires and there wasn’t any power to the high pressure switch. Not...
Thanks boss. I’ll chase it this week.
I have a 99 9200 with a 12.7. The fan work as it should when I put air to it. So when I start the truck it’s engaged, I checked power to the new...
Ok guys!! Thank you for all the help. The culprit was the pressure regulating valve. Must have stuck because of sitting for a few years. Leon
That pressure valve is different than mine. It’s much larger. Also is the fuel passing through the filter housing to the ecm block then out to the...
I am having an issue with the oil pressure acting erratically. My driver called and said the pressure had dropped to 20 pounds running. He was...
Ok, so all grounds have been replaced. It appears the fuse that protects the ECM blows as soon as the batteries are connected. Don't see any wires...
I’ll check for a possible broken ecm wire at the battery.
I forgot to mention that after the starter, relay, mag switch changed it started a few times. My driver took off to to MA and it started going the...
