Always replace brake shoes. They soak up the oil and can catch fire or crack. Also you cannot wash then off the material soaks up the oil into the...
Depends on condition. Wheel seels are usually 2hrs each book time and races can add another hour. That is for each wheel end. Now if you are rusty...
S60 pans do like to leak. Just make sure they use silicone on then seal lines. A lot of mom and pa shops dont do this and they leak again
Just think of it this way it could be worse you can be driving an MBE engine lol
Here is another secret. The dd15 and 13s like to leak at the seal ring for the air compressor
I know what you mean. I have to put 42 to 44qts in so drivers don't think it is low. I have seen large isx Cummins be as bad
Miss read post before me
For engine that size that not much loss at all
Oh if you get you clutch done make sure the gap between bearing and clutch is 1/2 in. And you fork gap is 1/8. A lot of guys do not do this right....
Np i work at a dealership and do it all the time. Just check what color the dye looks like under light and make sure engine dye. Some are one...
I seen a report off the computer of an old guy who averages 11. But he drives 55.5 n average. Lol yes those computers keep track and you can ask...
Have to becareful. Doing that can also be bearing issues. Have someone looke when you lift and see if the king pin moves. Basically the area under...
Yeah drive line can do it. Sometimes even a wheight falls off and you have to get it balanced again.
Check ride height. A chew can os close to most specs it should fit above the spring. Most of those trucks are 2 5/8 to 7/8. Also do you feel it in...
Sorry ment to say 1/2 above the pan gasket.
I do check for this issue. Steam off the engine then have die in engine and run for up to 30min not moving. Then if die shines with black light...
There are mount kits that will hold on to hand rails back there
