Once you see how it's done, it's not that bad. You need to remove the channels from the inside of the door, you can get away with doing one, but...
If you have the remote key lock/unlock fob, then your door switches connect to a module behind the main fuse panel. when that module gets a...
They don't do a good job of documenting that your sleeper fuses can be under the bed. It's the black box with 2 torx screws on the top for the...
You don't want to supply 12v to any of the wires. That can damage your engine ecm if it back feeds through the cruise pin 6 wire. Your red wire...
Well crap. I was actually hoping for 4.. or 2. Do you have it installed yet?
Most likely it's your actuator not switching between defrost and vent. See my post here For a schematic of the air actuated system used back then.
[ATTACH] Here's the schematic for your system. Hope this helps. I threw a red box around the actuators and where they are plumbed to.
Throw me the last 6 of your vin and I can look up the schematic and other drawings for your HVAC air system. I probably have one in my tool box,...
Sometimes they tie up the wires so tight that as soon as you try and remove the HVAC controls those wires pull off.
Here's a picture of the wires for each type of switch you might have. [ATTACH]
I had a huge wall of text here describing how to hook up the light, but from what I see over on easy jake's website the switch only has 3 wires...
the instructions at easyjake.com are completely moronic and will confuse anyone.
So at this time I don't know if your easy jake has a lit switch or not. if it doesn't then my instructions will be perfect, if it does then my...
I forgot to ask. Is your easy jake switch lit or not?
Would you mind providing the last 6 of your VIN? That way I can look up schematics specific to your unit. I don't like giving advice until I...
Just an FYI about installing a qualcomm in a 5700. The dash gets it's clock and compass information from the virtual technician. The issue is...
It might cause you a medium amount of grief, but shouldn't be too bad. I'm betting the biggest problem your going to have is that everything was...
You have a detroit Axle. The king pins are secured with cross bolts but it's the covers for the king pins that are held on with snap rings. On...
Also, for those with the old systems, one of it's main issues is that it isn't sealed very well. The ducts are made in sections and they may not...
On the brand new Star's the whole HVAC system has been remade. The new system has 30% more air flow and at least 12% reduction in temperature...
