CGI plug 9S-8010 Oring 6V-5065
Ok great I appreciate all the help guys!
I have a 08 t800 with a tuned C15 SDP engine in my tri-axle dump truck putting out 630hp. When I pull a hill loaded at about 80,000lbs the 13"...
It was from Kurt
located on the top side of trans on driver side should have air lines going to it
Almost sounds like the range piston on the back side of the trans or range slave valve, can you hear air leaking when you shift from low to high...
Consumption has gone up since I noticed the blowby to about 1 gallon every 1,500 miles. Not sure what was done or if it was even overhauled.
Thanks for the fast reply! I also notice seeping between the spacer plate and the block on the right side of the motor. Could this be related? I...
I've been having increased blowby out of my breather tube in the last 2 weeks. I decided to run the overhead just to make sure nothing was off....
Not sure on the rebuild it def wasn't done at cat though. Not sure how many miles since it was rebuilt also, I had the truck for a little over a...
I have a 04 C15 MBN “debridged” with a stage1 BW turbo, 6nz cam with all new rocker arms. I had it together for 20k so far and just recently it...
My bad New Jersey
Does anyone know of a machine shop in the tri state area that can do this type of work? Thanks
Pretty much the same block as a single turbo C15 so same gasket as mentioned above.
Look into Stavola, they have a hired hauler link on their website. It lets you know the insurance requirements and all the other important info to...
Cool thanks for the help guys!
Hi I was hoping someone could point me in the right direction on this problem. When I'm changing into high range from low range the trans doesn't...
Its an 04 379 last six are 813048
Hi guys I'm having a problem with my marker light relay, it keeps going bad I think there is too much resistance being built up since the top...
I just got done doing a 600hp file, Kurt Murray stage 1 turbo and 6nz camshaft in my 04 MBN It's in a 04 379 triaxle dump and best I got so far...