I second liner protrusion and new spacer plate anytime the head comes off with head gasket troubles
R 134a in my 91 and 94 are 3 lbs for a day cab 3.5 with a sleeper give or take
3ZJ52024 is a 3406c 425hp@1900 rpm with jake brake as shipped 4mg33771 is a 3406b400hp @1800 rpm carb certified freightliner application as shipped
If the transmission oil cooler has coolant lines in and out, and transmission oil in and out. the transmission cooler is junk filling your...
good sir are you to tell me that every Cat powered Peterbilt that had a crossover between the tanks and drew from the bottom were not only...
Time for thermostats
My machine shop guy and local cat guru says cut the counterbores deep enough for the thickest counterbore shim. I think its 5 thousandths and you...
Please explain coolant jacket inserts. IE location in block, function, etc... I have built many a cat engines dont recall running into coolant...
This information is from cat sis from the factory this engine was sent to paccar to go in a peterbilt or kenworth with a jake brake. I dont...
Because it was sent from the factory sent to the peterbilt or kenworth assembly line
6nz72505 build date 2002/05/30 475 hp @ 2100rpm paccar with jake brake
Replace the return splitter. if you have done everything above and your feed lines are identical in length up to the tee. The return splitter has...
550hp 1850 brake saver file. Had my 5ek flashed with this tune and it is day and night. Dont know about that zeki turbo but seems to be borg...
what he said
please explain flooding with fuel. Cylinder filling with fuel ,slobbering fuel at exhaust manifold,Cylinder hydrolocking with engine off???
DONT CUT THE RED WIRE!!!!!!
Why would you wanna swap out your aluminum hood for a big heavy fiberglass hood, especially a long hood???
Switch one of the two wires that power auxiliary switches to the number 2 pin on the cord then you should be good to go
I have always wired them and found generally the dump valves were wired to the # 2 pin like on your plug diagram
What about the local Cat dealer?? Last summer went to cat for a reman head for an accert, cat told me no remans in there system (Milton Cat) parts...