I second the above comment. Especially after just having the governor replaced, most likely there is an air leak to the unloading valve causing...
Start tearing down and inspecting. Is this knocking noise also present with a misfire?
it would be quite tricky to run all that multiplexed stuff correctly in the truck after a dt466 swap. I am sure it has been done, but in this case...
Ya I know that. The majority of the trucks I was doing motors in were leasing trucks so as long as the job got done in the quickest amount of days...
Oh learn something every day. I have only seen them in the drivers mirror. They also put them the frame by the radiator? What side?
I believe the m2's have enough wiring back there to move the switches to the holes you want them to be in. Prostars I am not sure I wasn't inside...
I stand corrected. Like I said above, haven't had one apart, never seen one in the shop failed. only about a 1/3 of a workflow is cascadia though.
I agree with you on the exhaust/engine brake existing on the shifter. I cant speak to the cascadia's but with a lot of trucks you can run wires...
You can select the inter axle lock and transfer case lock independently from each other. Having just the transfer case lock on these trucks makes...
can you pm me the vin so I can check in the air schematics for that specific truck and see what you may be talking about? That doesn't sound true...
I have not had the pleasure of removing a cascadia steering wheel, but I am relatively certain these trucks do not have clock springs. That being...
p.s. To clarify by what I meant of just using mig wire, if I had to weld up an exhaust manifold bolt hole, I would choose to go with mig. I think...
it has been awhile, and I am not sure what I was thinking when I posted being as wrong as I was in the drive. It is solely gear driven. I have...
I would just use some mig wire in there, I personally have not done it, but I know of two trucks this super slick old school mechanic in my shop...
In service maxx some big bores allow you to reset the aftertreatment filters in the computer, so the ECM knows they were removed and cleaned, or...
It depends on the material the cylinder head is made of. Why are you guys saying welding will not work? I disagree highly as I have seen it work...
If that trucks a 2016 and the batteries are bad, you may still be in basic, a ride to a freightliner may get you some free batteries if the truck...
Yes they call them 'world' transmissions, but that is not the model of the transmission a 2000 is vastly different then a 3000/4000. Also not...
I believe with the exception of the big bore maxxforce 11 and 13's that all the new motors and trucks are mostly garbage. I like the way the...
well then I know absolutely nothing about that motor.