Inside your Apu. There is a controller module, make sure those two plugs are pushed in good. Also want to check to make sure you have battery...
You have to adjust your throttle. Sounds like it needs to be slowed down. You are looking for 60 hz. Your voltage should be 120 +- 10. But your...
Yeah there is a glass fuse on the board, but my guess would be your capacitor for the fan is bad. Just would be my first guess without taking any...
Alternator is easy to check for. If it starts then suddenly stops. You'll want to disconnect the purple and brown plug on the alt. Start your Apu....
Have you taken the bottom plate off and inspected the filter and plug? Everything dry? No oil collecting at the bottom?
Breakers are on the firewall of the Apu. Take a 1/2 wrench or socket remove the top cover for the Apu. Not just the diamond plate. Looking at...
Under your bunk, in the evaporator box. Removed the lid and you'll see the board. Also there will probably be a service light glowing.
They're auto resets. Sounds like you need a new CCU board.
"Regular air?" These systems are vacuumed down then filled with 134-A. You need proper gauges hooked up to get a pressure reading. When you kick...
Sounds like your Apu isn't sealed properly where the lines come into your bunk.
Go to your evaporator box, under your bunk. Take the lid off, you'll see your CCU board with all the wires and everything plugged in, you'll see 3...
First you need to take the cover off your Apu and check your generator belt. If it's tight and not flopping around then you'll need to check A/c...
Sounds like you lost prime. On your control panel for on off just hold that button down and it'll let you manual crank. Try not to let it crank...
So you don't have power at your display? First take your cover off your apu and make sure both plugs on the control module are fully pushed in....
So you have the interlock installed? If so pull the fuse for it and try to start. Should be the little yellow wire with a 5 amp fuse. (Or 2.5...
Usually the symptoms you see with the bad capacitor would be around 90v to around 100v. Hate to tell you this but looks like a bad generator.
Hard to say. Did you check at the outlet or generator? Condition of generator belt?
What symptoms are you seeing? Like hearing grinding or feeling resistance when trying to spin the generator pulley? Or we talking not getting the...
Using your apu as a battery charger while using the inverter just seems kind pointless when you could be using apu's main function a 6000w generator.
Also possible that breaker isn't holding anymore. On your control panel have you hit the ESC/reset button? Without taking a look myself with a...
