What works good sometimes is to get a stud or a bolt that is long enough that you can cut the head off and it will stick out far enough that you...
Something you might want to look into is the sensor on the back of the cam gear cover I think it is a Rpm sensor (not sure) Had one of those with...
Can anybody tell me if the fuel burn can be calibrated so as it reads the correct amount. In my last truck, it had a cat readout in the dash that...
There is a fuel line that runs fron the primary filter around to the back of the head. If it is loose or has a small hole in it and leaking, when...
Good to hear you got fixed up. When you converted the turbo to the old style with the hose comming out of the compressor side of the turbo, did...
When I switched ecm's I didn't touch the plumbing for the wastegate and it worked just fine. The 6nz ecm dosen't compute the amount of fuel I'm...
I had already done the ecm swap before I put in the 6nz cam, and injectors. The injectors out of the mbn look the same as the ones from a 6nz...
I read that the injectors for the mbn were as follows: Interestingly, these "bridge" engines leading up to full ACERT production, will use a MEUI...
Do you have a engine brake? and if so which one jake or pac ? the reason I ask is that when I changed my cam too the cam out of the 6nz I had to...
What kind of rear suspension do you have?
There should be a small line that comes off your govenor and runs down to your air drier. Spray it with your soapy water from one end to the other...
The longer I idle the bigger the cloud but it cleans up instantly. Same thing all the mechanic's I've talked to say not to be to concerned about...
Yes Idle quite a bit when getting loaded about 20-30 mins. No dyno for miles. The head was not a cat reman but was done at a place that rebuilds...
Does anybody have any idea's on this problem. When I let the engine idle for say 20 min, when I take off it lets out a puff of blue smoke once it...
When I bought the MBN new I was told that if I waited 2 years that I could uprate it from 500hp to 525 free! same thing if I had only had 475hp....
What if somebody wants to uprate hp or torq or both and they are not on warranty anymore? does cat still want a premium for that if they don't...
Anybody have any idea as to how much a used 70 pin ecm is worth?
FLS 18 FTS 11 trims 6999 2300/550/1850/6nz
Years ago I had a thrush washer go in a eaton diff that would only vib on torq and comp. also check your motor mounts I had a KW with a 444xt one...
yes if you would please. what diff do you think running one on a 6nz would make? do they push more air?
