D and D instruments or speedometers in the Twin cities has them new without the KW emblem with or without the trip meter very reasonable. I...
Diesel Components in the Twin Cities carries Borg Warner turbos, they will even pre-drill for the oil lines to make the Detroit replacement a bolt...
do you know if you have a multi-torque program in it?
Depending on how much night driving you do you might want to reconsider, my buddy had some and the joke was, if someone was coming at him with...
The resistor is inside the cab , on the passenger side, near the center counsel, 2 screws, almost up under the dash.If that isnt it , probably...
was this engine originally a PEEC ? If so they did have a change for the oil pressure sensor. Originally they were incorporated into the...
Do you have a fuel pressure gauge in the final filter housing ? , if not put a gauge on to monitor it while you are running it , see what changes...
thanks for the replies, I think I'll try to find a flex air and try and keep it paccar.
I think I've reached the end of my rope with the new style 8 bag,my back hurts just talking about it. I'm contemplating cutting and pasting either...
Does anyone have any experience with the Paccar MX engines? A friend of mine is considering one in a new truck. I understand that they have been...
multi-torque 380-430 with 1650 lbs tq rating would be my guess with the high torque in the top 2 or top 4 gears
just re-read your post and you did state that you didnt have brakelites on the bobtail... sorry
do the brake lites work on the back of the tractor?
engine side, under the hood , it'll be marked with a tag , you'll have to look for it but you will find it
On my t800 there is a fuse NOT in the panel, but on the front of the firewall right in front of the driver. Look around .... kind of a stand...
you didn't say what type of suspension you have, some are more picky than others when it comes to ride height as it changes pinion angles also
Ground out each wire to see which one makes the gauge work in the dash, when you find that one hook it to the post on the sending unit. Hook the...
one wire goes to the post on the sending unit , the other goes to oneof the screws holding the sending unit into the tank or virtually to a ground
how about an update ?
bingo!!!! We have a winner !!!
