I found that it opens and closes. I assume it's closing all the way as it'll lose all the "heat". But sence I've had the truck even last year when...
Can anyone post pictures of the HVAC assembly and wiring diagram? I need to see the in dash part, pretty sure I have a bad blend door. Last summer...
Thank you
I recently had been having trouble with my 6nz. With help on here narrowed it down to a the W.G. actuator. Is there an install/adjustment...
I pinched the waste gate line. Trucks runs like it should egts stay at normal levels. It'll run loaded 500-700. I've been being easy on it,...
Yes, it had a 550 tune in it when I got it. I didn't know anything about the actual tune. I have a freind with an uncle that is a MHC mechanic and...
I have to down shift at 1500 anything below that and the egt's climb even more. If the truck didn't have an 18 spd it would be almost useless....
I'll have to look tomorrow. So everything I've found that was replaced has been replaced at a dealership with the stock replacement. I think i...
I had the shop check the fuel pressure and run some injector tests when they did the overhead. It all looked pretty clean, i thoroughly cleaned...
I pulled the entire turbo off checked both sides, shaft play waste gate movement etc.. All was in tip top shape
This is what makes me think mine has an issue. In oklahoma loaded I can barely keep mine under 900. windy day that wont happen on level ground. I...
When I took the turbo off I inspected the manifold. The divider and rest of the manifold looked good. I took at picture of the manifold outlet let...
It says A/r 1.42 M3 The Cat reman tag says P/n OR-7923
Would a 3406E turbo oil feed and drain be in the same spot as the C15?
I'll head out and see if I can see it with a flash light, if not I'll check again tomorrow. Thank you for the help
Thank you for the info. Maybe I'm just being paranoid. Just concerns me it runs these temps empty level ground. If it hit 1000-1200 on a hard pull...
I will look again. I didn't see a number on the hotside. Do you know where it is typically located? I'm now thinking that, thou the actuator...
What temps does yours typically run. Hose looked good, but went ahead and put a new one on. I'm now thinking that, thought the actuator moves. I...
Post turbo about 5 inches
My 6nz oil temp usually runs about 180(same as coolant) unless it a cool rainy day or just a cold 30 or less day then it'll run down around 100...
