We’re they allowing fuel to seep into the cylinders? Did the truck smoke much on start up?
Well I guess no one else has had this issue but when you guys do come across it this should help you out. http://www.filedropper.com/eccwiring...
No my problem consists in the plug for the ecc. Anybody have a breakdown of the wires going to the main 24pin connector on the ecc behind the...
Somewhere in the wiring from the computer (silver box) behind the gauge panel the signals will work intermediately. You can play with the wiring...
Isspro R650 is probably the thermo coupler you need.
Problem is your truck most likely has the multiplex gauge systems which means its a lot harder to fix when something gos wrong. It could be the...
Sweet! Which chip part number did you use?
Its just a ball on the pivot with a bushing that snaps in on the bar. Takes some effort and normally smashing knuckles to get them apart.
If you pull the plastic covers off your pivots on the outside you will see the large nut that holds them on. With your motor out, plug it in see...
Ah I see. I didn't realize there was a link there. When did this come out? In 2005?
What are they? Are they software chips like the Cat displays have?
Could have a 5EK file, 6TS, 1LW or a 5DS
How much was it on there for?
I just had problems on a 97 star with a 3406e recently. Issue ended up being a bad ground wire on the stud in the head behind the intake
You're right. The trucks with both odo speedos and datastars start back at zero after 999,999 but data star only trucks do not. Seems to be kinda...
I'd also like to hear some ideas. We have two trucks that will be approaching this issue soon enough. I know someone who I think just uses their...
Found the problem now. Blocked off the feed from one tank at a time. When we blocked off the driver side tank no air in the lines and fires up...
Theres no smoke (fuel) coming out of the pipes
No shut off valve. No equalizer on the feed line side. Seems we never ran it long enough in a seperate jug of fuel. With the line going into the...
The sleeper ignition trucks say that right on the switch.
