Good info. I did place the order with 18k springs. I'm going to guess it will be similar to how your 20ks perform. Regardless it sounds like it...
You got a lot of cushion with that big tire Plus always being weighed down. I'd love to run a 385 or 425 but with the empty weight I'll probably...
I know you say I'll not notice the difference, like I genuinely asked why would I make the front end stiffer with 20 to 22,000 pounds springs, but...
sorry for the late response guys. To clarify again, the front axle is rated at 20K and this is going to be a flatbed truck. Not a dump truck (yes...
This is mainly for the heavy haul and dump truck guys, but I am building a new flatbed truck for dedicated work grossing 60K lbs. Going to be a...
Just to bump this up. Hooked up insite a looked at the log. At idle, the throttle position is pulling 1.03 volts. Pressing the throttle ever so...
I did actually just get insite so I'll have to do that. I'm assuming a sign of wiring issue will be a voltage spikes or dips when slowly pressing...
Pedal is harness is exactly the same as the floor hinged versions in the older t800s and what not according the KW if that means anything. I have...
Dang no one has any ideas? Lol seems to be the running theme no matter where I go. Ah well. One of these days I'll figure it out
It seems no one does the test the same way. Plus people have different definitions for a whisper. To me a whisper is talking (whispering) at a...
2009 Kenworth T370 Paccar px8 / Cummins ISC with weight reduction kit 1.1 million miles / 29919 engine hours (rebuilt in 2021 at 780k miles) Been...
Yeah that's almost a curse to me being a buckies fan haha. But thanks. It is again a huge weight off my shoulders
Well $5400 later, I have new hearing aids in both ears and I can hear way more than what I thought was normal. I was way overdue for these and the...
Yeah normally I just crank up the volume on my hearing aids and I can make it through, but it's always been a struggle for me. Even if I can just...
My entire life I have worn hearing aids as I am legally considered deaf. I only have about 25 to 30% of my hearing and Its only going to get worse...
That's a good point. I guess another good example would be a spread axle flat with a dump valve for tighter turns. Good to know the axle can take...
Yeah I saw your truck in there with the moffet. She's a good looking truck. Tossed some pictures into the mix for ya.
I've been summoned to share some pictures. Here's a few loads Ive done on my weird Frankenstein of a truck [ATTACH] [ATTACH] [ATTACH]
Honestly... Its motivation. I really want to get back into it but just never had the desire too. I still have my camera gear so I suppose any time...
Thanks! Its a pain to keep clean after 5 seconds of rainy road spray but I love it. Wanted to do something different and I like how it turned out
