All, I've got a reefer that's got me going crazy, it's on its fourth starter in only a couple of hours run time. The reefer will start fine once...
Quick Update: Install was easier than I assumed, the rad we got actually came with the frame so we did not need to remove the frame from the...
It actually was the upper mount, broke right off the flange, it looks like the previous company tried welding it where it cracked and it finally...
Had a fan mount break on the old N14 KW and take out the rad, looking for any advice on replacing the rad. Also, from what I've read the 97 to 07...
Unfortunalty its an SB3 with no data logger on board so can't prove that it stayed within their range. I do have a signed copy of BOL from time of...
Load was dropped of July 25th, claim filed yesterday. We're currently looking at installing a data logger into the trailer. Any recommendations?
Hi all, Got a wierd one here, so I just got a call from my insurance that the shipper has filed a claim because of temp abuse/failure. Now the...
Update on the truck, removing the fuel filter was darn near impossible. When I finally got it broken loose, air rushed in. I'm thinking the saddle...
I checked for freeplay yesterday as that was one of my biggest concerns. There was no turbine thrust and a barely perceptible amount side to side,...
In neutral it'll rev to the limited RPM of 1500, its only in gear that it struggles. Driver said that at 1100 RPM the engine jerks like its...
Hey all, Driver recently experienced a random severe loss of power driving on flat ground. I'm thinking this is a fueling issue as the CEL didn't...
It is one hell of a mess. Waiting on the local dealer to open and the driver to get back from delivering the load so I can tear into it. Roadside...
Not anymore, the code 35 still persists and I still have to jump the start relay to start the engine and the high speed relay. While probing, I...
Well, got it up and running today. I think the relay board has a blown trace, the run relay is always on, and when I jumped the start relay it...
The driver got to a TK dealer, hopefully they come up with something as easy to fix as the above and don't charge an arm and a leg.
Hi all, This has been an ongoing issue for the past week. I've pulled every relay off the board and tested it and followed the board schematics...
I had 12V on both power leads, not sure which is the main. All fuses are good, I've double checked them and checked the solder joints for the fuse...
Correct, no power at all actually. Took out the relay board and found the CH trace was blown, but I was able to repair that.
Hello all, We've got a 03 reefer with a SB3 max that just stopped running out of the blue. Opened up the electrical box and saw that the switch...
Not quite sure where to post this, so if I'm in the wrong please let me know. The reefer was running perfectly fine and then it stopped, no power...
