Havea strange problem with some trucks, they are putting too much air through the service brake hose to the trailer, and lock up the brakes...
My issue ended up being the motor, or controller inside. It worked only on high, didnt return to bottom, everything else seems to have tested ok -...
FWIW still having thr issue. New sensor started reading high a week later. Changed it, worked for a week, then reading high. 5v seems ok
Well, it was the sensor, swapped with another truck and its good. Thanks!
On the topic of air gauges, my 2002 Int truck gauge 2 is about 15-20psi too high. At complete zero it shows about 15psi. Does this seem like a...
I have an international tractor (2002 4400) and it has a leak from the adapter on back of trailer from the service line. The adapter is the one...
when you renew your permit you dont get any more chances but your test starta from scratch
Yes you do
Changed both cans, nada. I should have tested first but the cans looked old and were cheap enough to replace as preventive maintenance. It ended...
My tractor is leaking out the exhaust port when one of the trailers is hooked up during when performing an applied leakage test (truck in gear...
Hello. Whats the strongest version of the eaton 6 that would mate to a dt466? In one if my trucks I have a fso6406 but its a 185hp dt466. My other...
Real stupid question, wheres the relay? Dont see it in fuse box, thought it was just a bcm
Heavy, on the same topic, on my 4300 the wipers work only in high, and wgen turned off, will stop where they are at that moment - not return back...
Thanks. I am in California, so Ill add a few grand to the price and give it a go.
Hi. Whats a ball park price for a 2011 International 8600, single axle daycab, 275k miles, Maxxforce 13 430hp, replaced egr valve/cooler, cat,...
got it! Since the keypaf wasnt lighting up I figured its gotta be an ignition wire issue. There were 3 wires going from ignition to the crane...
batteries were removed ok neutral safety switch, will check that too
To add.. I chaged batteries because the ones in the truck were drained for extended time and didnt hold charge well. I also did some welding on...
Hello. I was removing a number of unneeded wires and controls from a truck (it used to have a crane) and though I thought I tested after each wire...
(6-Tires) 11R22.5 tires GL909 Severe Service 16PR tire 11/22.5 Samson 11225 | eBay