I finally got a chance to check it out, first thing I noticed was oil dripping from the pan plug, and it was loose, this tech is a hack but is the...
I have a oil pump question, another tech here at work did a front gear cover reseal on this about a week ago, from what I have been told he did...
I know how to run the overhead what I’m referring to is the actual timing marks on the gears, I’m replacing the camshaft and sealing the gear...
I'm putting a 1999 C-12 back together that is getting a cam, lifters and a gear housing reseal, I'm not seeing any timing marks on the crank gear,...
I have had that issue with the Cat engines but I'm just a little gun shy on these because I haven't worked on them enough to know them very well.
I forgot to mention that when it codes for the number 3 & 4 injectors it codes for opens and shorts for the coils almost all at the same time
Thank you for the advice, I removed a few things to get myself a little more room to work, I tested the injector coils from the ecm 36 pin...
I'm going to go back through and test the wiring from the ecm through each injector coil and back to the ecm first however these Mitchell wiring...
Thanks for the advice, I may have forgot to mention that injectors 3 and 4 were replaced at the same time as the injector harness, and the...
I have a 2013 Maxxforce 9/10 that runs rough and codes 3661 fmi 5 injector 3 close coil open circuit, 3662 fmi 5 injector 4 close coil open...
