I have not been north in a long long time. Can some of you tell what road conditions are usually like up north around the end of February? Will...
That is what I thought but the only switch that I have been able to locate is a push button behind the terminal to plug in the computer. pushed it...
I have a 93 KW with 12.7 Detroit. Cel came on today, can any tell me how to pull the codes? Everything seems to running fine, but what I have...
Mark I have a TND710 and the power cord broke at the plug that goes in to the unit. I changed over to USB plug and the unit would come up but the...
You have to first identify the style fan clutch you have. Most take air to engage but you may have a Kysor for example that takes air to release....
here you go anything you want to know to trouble shoot your problem:...
Try Mckenzie tank line in Tallahassee but also have hubs all over the south.
Did you inspect the pin or some call it a plunger behind the slave valve? That small pin is what actually tells the valve to send air to the range...
If you are actually moving I would think freight and freight lanes would be important. What good is paradise when you may have to dead head 2 or 3...
Just for kicks and giggles try greasing the fifth wheel. A dry fifth wheel can cause strange frontend noises in a tight turn along with helping...
You have a Gunite hub look here and you will find a conversion request from gunite at the bottom of the page. There is alot more to converting...
If you want to stay in the trucking industry you may want to keep looking for a company to hire you. I don't want sound negative but 5K is no...
You may want to look into having the overhead ran if you have not had it done recently. It should make a difference. Here is a link to the...
You might check your insurance. I didn't think my windshield was covered, but checked and it was. Insurance company had safelight replace it. I am...
He most likely has a Horton fan clutch and they engage with air and free spin with no air. I believe it is a Kysor fan that takes air to release...
It is probably the leveling valve, if you replace it be careful with the linkage if it is adjustable. The wrong ride height can mess up a lot of...
You probably have a bad ground from the corroded pigtail replace it and the light and make sure the ground from the left tail light is clean and...
Weird that a trainer would commit so many violations in front of you then harass you about your abilities to perform your job.
Get the Vin and call the dealer, they can tell you what engine is in the chassis. If it was A glider and built by a dealer they may still have the...
If you are sure it is the original call the dealer and give them the Vin and they can tell you. There may also be a data sticker some where in the...
