Another little update: Turned up the fuel pump a couple times and wound up with the rack screw in the glove box and the AFC deleted. It will run...
Got a B model CAC swapped onto the old Clatterpillar. Dropped about 200° on the pyro and pulls a bi harder as I don't have to let off for EGT's....
Is for horses
I have yet to be able to find a JWAC for it so I decided to convert to air to air intercooling. Has anyone done this on a W900A? It looks like I...
Hmm, that link says it's for a C15 Accert. Is it for the 15.2 Accert or regular 14.6 C15? Or is that what you mean by having a kit for a 6NZ...
Any more info on this? Any chance it could be made to work in a B model?
Yours is an overdrive 9 speed - .73:1 in high gear. To the OP - the following link has the part number for a conversion kit if you have the right...
Been a minute, long story short, compressor was fine, oil cooler was the culprit. I am currently on my 6th or 7th flush to get the gunk out -...
That is correct as far as I have found except that the oil pump is the same for engines with and without retarders - they use a priority valve to...
If you would be willing to get me in contact with him, I would love to try and track down a retarder setup...
Appreciate the input. Your generation that knows about the likes of a 1693 are hard to find. As for the timing, I am certain I advanced it...
Do you have any more info on this?
To quote myself: If you want a 13 speed from your current transmission, buy Eaton's K-2034. This will give you a 13 speed, but your overall final...
I think Eaton's K-2034 would convert your transmission to a 13 speed - it would be a triple overdrive 13 speed though (RTOO) with a .62:1 ratio in...
What size tires? Could you go any shorter to offset the high gears? If you are running 80+ MPH everywhere, the 2.50's would be great. If you ever...
So no such thing as a front 3rd member without a power divider? I.E. full power to both axles all the time? Thought I had seen mention of such a...
If the front axle did allow "inter axle differential" action, wouldn't the front axle always be the one to spin out as the typical "power divider"...
So if a guy were to want to convert a tandem truck to a tri drive, what would I need to get for an axle? Any front axle from a set of 46k drivers...
We'll see what we can do, but getting a video uploaded might be pushing it for this dirt farmer.
So I advanced the timing a little bit last night. Cold started it in the shop (55° or so) and WOW - what a difference. Started about the same, but...