Hey, does anyone know if there is a way to program the ACM to inject more DEF? I noticed that when it injects more DEF the efficiency goes up on...
Ye Yes it worked. Thank you very much!
Having the same issue. It had high soot and temps rose. When soot level got to medium the temps decreased. Not 3 minutes later soot went low but...
I ran all the tests for the DEF issue. Quantity test at 131 ml. Quality at 32.5%, checked for contamination with the test strip and regened the...
[MEDIA]
On one truck, it seems to be fine dpf I asume. Sitting at around .556 psi. I'm checking another truck that does the same thing but the it is over...
SPN 3216 FMI 16 is the fault. I have that happen in 3 trucks now and two of the have efficiency issues. The inlet surges but the outlet stays near...
Soot accumulation or coolant leak, egr valve movement, bearing on pull arm, egr actuator slow learn.
Anyone have this issue? I have checked turbo, pipes, hoses, CAC, and intake manifold. Swapped the ITV and double checked the EGR. Still nothing,...
Will check, ty there is a problem that i noticed. A fault relating to CAN communication between mcm cpc and acm. Also batteries were checked and...
I have a starting issue with a Cascadia, the starter was replaced, I checked the wiring in the Powertrain harness from MCM 21pin connector to...
Anyone know the exact parameters that need to be changed on Diagnostic Link? The transmision was an Ultrashift and we put in an Eaton 10 speed....
Does anyone know what parameter changes need to be made in the detroit dd13? Whag else needs to be done. I have installed clutch, tranny, and...
Boss made me throw parts at vehicle, until put of curiosuty i checked another pump. When i was gonna replace the pump i had seen the plu and...
Test drive the truck, when coming to a stop a check engine light comes on then goes away, its a good indicator the o rings are bad.
10 speex cool but 13 would be better imo
I had tested the injector with the DEF Quantity, and it came out at 131mL, so it should be good? Right?
Hi, I'm having the same problem. When I regen the truck, efficiency is at about 90%. After it finishes i saw that it dropped but also saw that the...
Does anyone have a wiring diagram for an N13 2015 with SCR? Thanx in advance.