Lift Axle, End Dump, & Other Suspension Actuation Systems Applications and Plumbing Schematics – Sealco Sealco has several diagrams with part #s...
Michigan Turbo in Grand Rapids buys truck and car used turbos and cores. Not sure how if it’d be worth considering shipping costs...
Yes, that’s how I ran the wire. The center wire behind key switch is the signal wire for starter crank. There is a way to bypass the interrupt...
I’m convinced it’s a KW thing too, don’t matter if it’s a Cat or Isx- W9 or T800. We have about a dozen Pete’s and a dozen KWs and only KWs are...
[ATTACH]
When the bank goes bad you can lose one of the solenoid functions or all of them at once. The truck I had worked on started with diff lock dash...
Those solenoid banks are common to go bad, recently had a w990 with your same issues. I ended up taking a bank assembly from different truck to...
Middle part of Michigan
[ATTACH] these are 1/4” wall, 6” wide x 2” high. 54” long with 4” bolt spacing
We’ve got a set of those fabbed risers we took off a truck years ago, they’ve been collecting dust since they were taken off. If you are...
Bottom one goes between the cylinder head and thermostat housing, top one goes between the thermostat housing halves
[ATTACH] Dealership may have a repair harness end although they were no help on a harness end for me recently. I ended up lopping OEM end off and...
[ATTACH] Inverted chambers on Peterbilts have the chambers facing the front, mounted on front side of axle
The blank dashes are a common glitch with both Peterbilt and KW many models, doesn’t matter what engine, there was an update to fix them years...
Not all synthetic gear oil is compatible, PAO based synthetic will blend with conventional oils, polyglycol based will not blend
If you take them out you will lose some clearance between your rear fenders and bottom of trailer. That rear panel looks like it will become an...
Is it an illusion or will that adapter ring (and hub cap) have to be pulled off the hub every time you change a tire?
Sometimes there’s still an additional grease fitting installed on the very top of the throwout bearing even though you have a remote line, you...
