If it keeps locking up, message me. Omntracs sent an update recently and it may or may not be the issue. Also, if you are running Co-Pilot on...
Boss pretty much nailed it. there are 3 things that must be met under AOBRD and Omnitracs to show movement. I will give the max #s 2 miles 25...
To make it even more simple AOBRD is more "flexible" with the data that comes from the ECM. ELD is very precise on what it wants from the ECM...
problem solved.....LOL
I have not seen any ECMs got smoked over an electronic log. I have seen install techs screw the pooch. The 2019 and 2020 trucks all have a new...
If all you are doing is logs, whatever is cheapest.....rather least inexpensive up front cost. I have done some cost analysis and find they are...
I am not sure on the pre-2000 past 1998. pre98 does not have all the data the FMCSA wants for proper ELD. The app may have an issue with it too....
it could be a couple of things. 1st is the cable. Each truck is wired different, so the cables have to match up. you had a 95 Pete, what do you...
Not sure what that means. I suspect auto correct gotcha. Like I stated, ELD will not work with a LOT of older ECMs (pre-200), It will work with...
It has to be in a place the driver can verify it is working and can reach to either side of the truck for a roadside inspection. I would try and...
Mods, if this is not good for you, let me know. If you wish to verify I am who I am, feel free to message me. That said, I am basically a Field...
If you are working, even a non CDL vehicle, it is On-Duty time, assuming you are running under logbook exempt (unless) status. Do yourself a...
so you used a 2013 cable n a 2018 truck? Thats the issue. THey are pinned out very different. You *could* do some splicing, but good luck...
I can surely help with this. I have yet to see anything older than a 1998 60s series that will work under ELD, AOBRD, and may work with EOBRD....
This is terrible advice. under ELD, this will show up in various ways, the biggest is what is called an odometer jump. If you want a very thorough...
first off, you cant use an "ELD" device on a motor that does not have an ECM, or an ECM that does not meet the data requirements of the ELD...
If I am following your question, you wish to use your own ELD device on a different carriers truck? Thats not going to work out to well under...