Thanks a bunch the both of you! I’ll get an ECM printout and if it checks out then I’ll pull pan and check mains.
I bought a T800 with an ISX CM870 that spun a cam bearing. I was hoping to remove the head and repair it but upon further inspection the liners...
I was wondering if anyone could help me diagnose a high temp warning light issue. The light and buzzer on my 3406b has come on a couple times...
The mounts that bolt to frame. The 377 is about 2 inches higher than 379. You pretty much need to go to a wrecker to source the parts that way...
1986
Should be on the block at rear on passenger side.
It’s a set forward front axle? Should just be able to drop cab and install hood that’s all I did to mine. I changed front springs as well however...
I was referring to the reverse light staying on, that way you could figure out if it was wiring or internal.
Did you clean both the cylinders? Maybe you cleaned the splitter and not the range shift?
Pull the sensor out of the top of trans but leave it plugged in does it do the same thing?
I don’t think it sounds like something mechanical in the trans, those transmissions shouldn’t allow something so catastrophic to happen when they...
It’s one of those roll around ones that has a vent hose that goes out the window.
I just need enough power for this portable A/C unit I have the generator for when I’m parked but running down the road it would be nice to use the...
When you say you replaced the airlines are you referring to the tiny ones from the shift tower or the large ones running from the slave? Have you...
Do you think a 3500w would handle that kind of surge?
[ATTACH] Even going by amps I’m way under! However that is probably running not start up.
Thanks a bunch! I’ll pick up a meter and plug it into a proper outlet and see what it spikes too. I don’t think it’s a pure sine wave, it came...
Where does the meter get installed? On the DC positive cable? Can they be found at most truck parts suppliers? You would think that 2000w would be...
I know this isn’t really a “mechanical issue” but I was wondering if anyone had experience with the power drive inverters. Mines a 2000 watt unit...
What year is your truck? Is it a unibilt sleeper?