My local napa carries it.
I use aeroKroil
The transfer case to front tandem. Shaft is around 4ft long so possible as long as it was in direct with the front end engaged. Front axle has...
We have a few trucks with WTEC 5 Allison 4700sp 7 speeds that are .74 and. 64 OD units but they have huge holes between 4/5 and 5/6 that the...
I am seeking some alternatives on finding one of the following in the tallest gear ratio. Mostly hauls heavy locally and within the state. It...
Bump. If I replace the camshaft, as mine has a slight nick in it from a busted pushrod, do I need to have the timing tool to do the timing or can...
I have heard rumor of using N14 crossheads on the NH855 motors. Removing the crosshead guide from the Big cam heads and just using the n14s so...
Bump with some information from the injector book. Stock injector on a Big cam I is 3054071 with a stroke/mm3 of 191/193. The same as the...
Silicone intakes makes a hose to go from 5in to 4in. Seemed like a simple and easy install in my ex military truck. Just didnt know if there...
What about using the intake manifold from the NHC250s that were non turbo. They have a 5 inch take on them. Or are the runners not big enough?
I am interested to know if there Is a list for the different hot factory injectors or the flow rate per part number on the injectors. Currently I...