I don't see a fill plug, am I missing something? No reservoir tank, no fill on end of cylinder, and can't get fluid to go in the plug at the...
Here are some more pictures, I took the plug out on top of the block seen in the lower picture, there was a spring inside, I put some fluid in...
Here are pics of the top of the cylinder, that's as far as I can get it to go up. Like I said I am guessing it's lo on fluid. I still have no...
This shows the bed raised as high as it will go right now. The PTO engages & the pump works, but my feeling is, it's low on fluid. The pump...
Here are a couple pictures of the hoses and Pump setup. If you look closely, on the top of the piston where the hose connects, there is a...
When the cylinder is in the horizontal position, yes there is some sort of plug on top of the cylinder case, however, in the full upright...
Well I got back under the truck yesterday to see what was going on. Turns out we were a little off, but that is because I gave you incorrect...
I was hoping someone wouldn't leave Tucker hanging!!
Thank you Goody, I will get back under there Saturday & see what's up. I wasn't sure which cable did what. The one cable doesn't move at all,...
Hello All, Thanks for taking a minute to read this... I have an '87 International S-1754 dump truck with the 5 speed manual. I am new to...
Just wanted to pass along that the rack was stuck, but to be safe I sent it out for a rebuild & reinstalled it last weekend with great results!...
Is there a shop I should look to for this specific Bosch Injector pump rebuild?
I got a call from a mechanic who looked at it, they believe that either the shut off inside the pump is bad, or the pump itself needs to be...
It kind of looks like a mirror image. it looks like this one.. [ATTACH]
I changed the fuel filter, then pulled the rubber line off before the pump. When I pumped the primer valve, fuel shot out the hose, so thats...
Hello All, not only am I new here, but I am also new to diesel trucks in general. I have a new to me 1987 S1754 Dump truck with the DT360 & 5 spd...
Just saying Hi & hoping someone can help me.