So here are actual pictures of the dryer that’s on the truck. It’s the correct dryer as I got part number from peterbilt. I’ve changed just about...
I have replaced the governor and it’s mounted right next to the air dryer. I don’t have an actual picture of the whole dryer but this is what it’s...
So I'm still having the issue after putting a new dryer, unloader valve and I also changed the inlet tube and hose because the hose itself wasn't...
Yes it is. I’ll check into that. Thank you
i have a 2004 pete 357 model, it’s a dump truck. My dryer continuously releases air from about 110psi till it reaches 125psi. I replaced the purge...
I have a 2004 Pete 357 and the high pressure is at 350. The fan doesn't shut off at all, I've changed the fan switch, orfice tube, accumulator and...
I took the cap off tank. The spool seems to be moving as it should. No difference. I’ve tried everything besides changing the actual pump and...
Thanks for posting that. So behind that big nut is a valve ? I’m able to loosen that up and pull it out to inspect/ clean ? I’m not a mechanic so...
Valve as in air shifter ?
So I switched the controls in the cab, no difference. I borrowed another truck to see if how it was and it worked just the way it should. I’m...
I’ll definitely check into that.
The PTO automatically shut off when you go to lower the box. I don’t personally drive this truck, I just own it but when I just got in it and went...
The pump is air operated so there is no linkage. When I have the PTO engaged and go to lower I can hear the air increase power the more I move it...
[ATTACH] [ATTACH] So I took a few pictures, there is a turn knob valve on the bottom of tank. I don’t see how the fluid can go any other way...
I don't have any pictures but will take some to post. The fluid has to go back through the pump to re-enter the tank.
The tank supply line goes directly to pump and then there's another line that goes direct to the trailer, there isn't anything in between such as...
I recently bought a ravens 30' end dump. I'm having an issue with it coming down slow, about 4-5 mins. It's air controlled and gravity down. The...
I wanted to ask if there is any requirements buying a used truck from a new truck dealership. I was told in the state of Va that a dealership is...
Would deleting the 05 emissions be an ideal thing ?
I'm sure this has been talked about a million times but thought I'd ask myself so I can let y'all know what I'm doing. This truck will be pulling...
