I can add liner shims off 1.8 tho, spacer plate off 1.5 tho at different places, upgraded head(new casting with checked out valves etc) that deck...
I'm not positive, but I think you need to replace tps switch and harness to match. Hopefully somebody else will chime in to confirm
Also read on another site that the moly/oil lube that they put on head bolts would bind and cause inaccurate torque values. On this assembly, I...
I went through similar issues. Out of frame, block decked and protrusion checked on assembly to have head gasket go 70000. Shop thought it was...
Buddy of mine had that and removed it when air valve started leaking. It was only for looks because it was just a shifter instead of high/low button.
Check battery connections and grounds. Make sure key switch is tight
I'm not familiar with ag400l, but I have ag400 and am very pleased with ride and 80ish every load. Buddy of mine has a t600 with ag380 and loves...
Very nice!
If you run virgin tires check with your tire shop about casing values. The tire shop I use pay double for 11r22.5 compared to 24.5lp.
Maybe check wheel in turbo just to make sure it's not starting to rub
Like bender said, I had same issues and turned out to be harness at rear head rubbed in clamp.
The guy I run for has a 625 and he loves it compared to his isx 600. No problems until head gasket at mid 500k. I would suggest tuning as a must,...
If your looking to keep stock elbow location, I had 6" on my last w9 with no problems. Buddy of mine has 7" and had to trim bottom of cab a...
I usually spray mine with good oven cleaner and rinse out with hose. Just cover chrome and paint with some plastic. Amazing all the junk that...
By chance would these be aerocab/bunk or could we be able to get old style modular bunk?
According to cummins book- "engine speed limited to max vehicle speed without vehicle speed sensor parameter value. Cruise control, progressive...
I was going to suggest switch or wiring harness at switch. I wasn't aware of that sensor, that's good to know. Thanks
Hey Kurt, if you think of it bring a couple of business cards. I just handed out my last one to somebody I passed going up blossburg mtn. See ya...
I have that turbo with mr haney's 7cz file on a 2ws and am very happy with it.
I also have 2ws with Mr Haney 7cz program, pdi manifold, Mr Haney turbo and cam. You will be very pleased. Sweet spot is 1400-1500 for cruising...
