I want to thank every for their input and suggestions. And like lual said my timing is the problem. Most of the don't do or stop doing training...
I have my cdl for over 20 years and works as a diesel mechanic, Now I was thinking about starting drive but don't have otr experience. I called...
Yes, You do need another mechanic! If the cooling temperature was ok before the rebuild, you could still have issue with the fan clutch. If the...
Have you take the secondary filter off after running the engine to see if it is full. You have to hook up clear hose to see if it is sucking air,...
Good deal. Glad you figure it out. Electrical issue on those truck are not easy. Would be good to find wiring diagram on the truck.
Have you try swap air hose at the pump.
First you need to check if there is any transmission codes (Roadranger.com). Try taking off in manual and see what happen. Try isolate the problem...
You can take the check valve behind the head apart and see if you have a broken o'ring. There is also another check valve on the fuel water...
If Standard, You want to check the clutch switch. I'm not sure about your truck but the cascadia has a starter relay in the PD fuse box.
There are two switches(sensors) that turn the fan on by activating the fan air solenoid. The a/c fan switch or the engine temperature sensor....
The first one is the turbo oil drain tube gasket and the second one is the engine breathe tube O' ring. You can buy the gasket and replace it. And...
You may also want to check and clean all the batteries terminals. All ground cables.
You are correct, did not think about air governor mounted to the air dryer.
As long as the system does not have a leak( p. Brakes released and brakes applied) and it built pressure 120-125 you can make it. Probably it’s...
Have to agree with Flood, but you can also do a visual inspection. You can have a chaffed sensor wire like Uncleal13 suggested. You may still...
Have to agree with everyone that says it’s a bad ground. Start by fixing all trailer ground wires and 7-way ground. Depends on the age of the...
You can do two things. 1st do what every body else is telling you to do or take it to a shop and have them do it for you. Do it right the first...
Most of the time, the sending unit goes out before the gauge does. If it’s a one wire at the sending unit, just connect wire to ground and see if...
You have to compare temperature with a mechanical gauge or with a infrared thermometer. What temperature does the ned shows when the engine light...
You need to troubleshoot the codes that you have right now that is active or intermittent active. But looks lik you are having wiring issues....