It's just an iva code. Sometimes check engine will light up, sometimes it won't. Either way it will derate for awhile. Warm up the engine a little...
No prob. Had it happen to me once.
Change the low beams... Might have had a voltage spike causing both to burn out.
If it only does it when it's cold, it could be the heater element.
Doesn't fit if the engine has the wide fan belt. The 600-625hp usually have the wide belt.
The tech at Dallas Peterbilt put in 0.1lbs over what the tag on my truck calls for. Think the system requires 3.35lbs and he put in 3.45lbs. Would...
How do you get it that cold??? I have an 07 379 Pete with a small high efficiency condensor and it can't even keep me comfortable. Replaced...
It's a 40 quart sump iirc. Sounds like your dipstick needs to be calibrated. If its burning that much oil I would just overhaul it.
Well there are "truck driver's" and then there are men/women who drive trucks. Bet you can't guess which group your in and which group I associate...
Well you posted B.S. what am I supposed to think. Your reply to my post confirmed my assumption.
The biggest reason CAT left the highway market had nothing to do with emissions. Paccar was gonna develop the DAF engine for there trucks,...
Problem solved. Broken wire in the harness to the A/C hi-pressure switch. Thanks for all the help.
What other switches in the A/C would cause the fan to come on? I thought if I by-passed the A/C hi-pressure switch that that eliminated the switch...
Stopped in at Peterbilt in Surrey BC yesterday. I asked them if they could check with CAT ET. Nope, they were to busy. Asked if they could print...
I'm not very good with diagnosing wiring and sensors. Would you mind explain in detail how to do this??? Thanks
Nope, nobody's been in the ecm...
Yes, the fan clutch disengages with shop air. No air leak at the fan clutch. The harness going to the fan solenoid has 12.22 volts when engine is...
I've searched the forum and read everything I could find as to what could and can cause this problem. Replaced A/C hi-pressure switch, jumped the...
iirc back in 99 you could spec either a 2WS or a 6NZ.
A friend of mine with a C16 built by PDI say's they installed the water pump from his MXS or NXS onto the C16.
