Ill have to go look and see. Miles I couldn't say but they still have alot of tread on them. Fairly new.
WEll that was definitely it! Steer tires it was. Guessing broken belts like it was mentioned. I just couldn't imagine that would have caused such...
Im gona take a set of tires of one of my other trucks and see if that fixes it
so think its the tires or the balance on the tires?
I am trying to narrow down this issue on my cascadia. Tired are good and newer. Brand new tierod ends and bar, new drag link. Truck had an...
Yes, i did a load test on each of the batteries.
What really blows my mind those is how its only 2 light switches and the Blower motor that cause this voltage drop. I can turn on litterly...
Pulled the plug off the back of the gauge. Tested voltage at the plug and when truck is running its 13.8v-13.9v. Flip the 2 light switches on,...
Yea i have a load tester and tested them. They're good
Let me try and check all of this today and I will report back.
I can check the voltage at the gauge. What would indicate to me that the gauge itself isn't bad is that when I flip those 2 light switches and...
Yes I did the voltage drop test and this is what I came up with Testing from positive side on alternator and positive on batteries I read...
So decided to do a little testing on this and still at a lose. My alternator is charging at 14.2v and my batteries are being charged at 13.8v....
No just single wire on the truck side.
Ya im not gona say 36 is 100% correct, its just what I could find online for like a daycab fld120
Condenser is oem still. When I looked it up this truck needs like 4lb 5oz but without sleeper it said 2lb 5oz I think. Yeah im using gauges. Low...
Its grounded through the clutch chassis now instead if a wire
Well I only need 3 cans In this one to work total. 36oz. I had to close off the sleeper AC lines of the truck because it has a hole in it and cant...
Okay the low pressure switch Im assuming has the 2 spades on the back, not the one with the 2 yellow wires coming out of it. I checked the...
I did already jump the clutch, and it does work. even just swapped the compressor out too. Its charged, compressor won't engage. No power to it.
