Great information and thank you! Those were the only two concerns I had with it. I’ll look into those two parts and just prepare to replace them....
I’m about to purchase a used WS 4700SF. The heat and AC work great, but when you put the selector on face, it only blows out of the far left vent...
Hello - In one of my older trucks the brake pedal is nearly on the floor. Dump truck configuration and driver is having an issue working certain...
It was actually…a whole gallon low. I filled it and no more lights on the dash. It’s all odd because it wasn’t low when I parked it in Oct
I was blue to get over to truck today. I poured some diesel 911 in in case I had a gel situation. Then I looked at the coolant reservoir and this...
Good to know. Truck hasn’t moved. Had me wondering what could have happened.
Yeah I didn’t do that. Thanks for advice.
I poured half a bottle of treatment in the tank back in Nov. I won’t try to start it again until it gets to 30s/40s
It’s not throwing a code. I have a system connected that tells me. Well, it’s throwing a code for DEF but it has been. That’s what prompted me to...
Truck hasn’t been started since around Thanksgiving. I went over today, turned on the power, it started right up. I jumped out and into my pickup...
Hello - I have a 2021 Mack with an MP8 in it. Truck has 164k miles. Today, my GPS system notified me of this code. The truck did not display...
After chasing this bug for the better part of a week, decided to pull the switch from the tower. Once I got the switch out and started touching...
Ok you’re suggesting I go ahead and connect all six of the new ones or at least disconnect all the old lights and connect one new light to the line?
Test light. Red one way, green the other.
I’ll take a meter over tomorrow and check the voltage. It’s a dump truck and the wires are ran through the body, so redoing the wires would...
It's a 2019 Freightliner. These are the lights I bought. [ATTACH]
We tried a tester today to verify the polarity and it’s not reversed. Nothing we did would get the new lights to come on using the very connectors...
Will do tomorrow and report back. Thank you!!
I stuck a circuit tester in the live wire connector to verify positive and connected the corresponding wire to it from the light. I don’t believe...
Are you telling me to use the negative wire in the positive spot? I don’t believe I tried that. If that works, how am I to understand the reason...
