I tried one, it didnt change anything!
Thanks for everyones input, back on the road again.
Well I made a bunch of phone calls last monday and pondered the best solutions, after talking to Tony's diesel in Sioux Falls it learned this isnt...
Thats interesting.......a 6TS will do the EXACT same thing, I know cuz mine just got a new crate 550 because the same thing happened to me.
Well after further inspection the crack or fracture more or less was located above one of the 2 bolt flange embossments in the block that the oil...
Went and talked to a friend that runs a machine shop he gave me a huge box of stich bolts so here we go! If it dont work then im not gonna just...
Well I havent had it since it was new of course but I rarely gross under 80K. So that might have something to do with it, I dont understand why I...
I appreciate the advice but I dont have $15000 to spend and I need to get this fixed tomorrow dont really care how just need it to stop leaking....
Far Call, I assume your "gas threads" are what I refer to as "pipe thread" am I correct?? There is about a 3in round raised area behind the...
No, its on the block not the cooler
Im lookin for some advice, started loosing oil on the right side of my 6TS 3406E this morning. I started checking for leaks and it appeared to be...
It cools down when the fan kicks on at a bit over 200, hasn't caused any problems I just noticed it recently. My exaust temp still barely hits...
I have a 98 3406E with 5232 codes and a fuel temp harness and I have been very happy with it. It usually averages 5.5 to 6.1mpg but every since...
We used to have on in a 96 IH daycab we hauled cement in a bulk tank with. It usually got the crap pulled out of it because we were usually right...
Thanks again Jas, think Ill replace the bearings anyway but it has to go back together to get me thru the week at least I know what size I need...
It is apart and the oil pump gears were pitted and worn pretty good and one or the back bushings have a chunk missing, I pulled a main cap and rod...
Going to head over to the shop right now, got a new pump so its going in no matter what. Found out the pump thats in there now has all most...
Do I need to use thread sealer or or locktite on any of the fasteners in the bottom end?? I was told I should locktite the oil pickup bolts? Any...
I have always used Fleetgaurd filters, Thanks Jas I think I got it.
Anyone have the torque specs for the pan, oil pump,rod and main bolts on a 1998 6TS 3406E?
