So got the new exhaust pressure sensor and it got rid of all the codes. Crazy how that shorting out can affect all the sensors on the string...
Weird thing is 30 is a definitely a pink wire, because there is a red wire at 41....so they definitely look different. All the rest of those...
I have a fluke but tested with my oldie and the sensor was still bad. Just my luck. I did blow out the old sensor and got it to read a value....
4.5 v going to that temp sensor. There was 3v going to the egr, but replaced the gas pressure sensor because it didn't have resistance and then...
OK so if I take my 5 volt reference and feed it back through the signal wire on my 2013 kenworth isx15 with the 2250 ecm, it should read high...
2013 with cm2250 ecm. We tested the number 30 pin and it has 5V so does the wire leaving that pin. The continuity in that wire is good with a...
Perfect! Exactly what I needed. Thanks!
Hello, I have a bad socket connector at pin 30 on the ecm engine harness connector 2. It is the egr 5 volt supply wire. How do I get that...
The jake brake on this x15 is really good. Definitely stronger than the isx was.
Lots of stop and go back roads stuff so need the extra braking. Yes the transmission seems to be acting the same other than the current problem....
So I wanted the jake break to come on earlier. The dealer changed the parameter to 25 mph from 35 mph on insite. Now when I tap the brake it...
Anybody have suggestions? The Nexus NL102p doesnt look too reliable. Scan guage good for clearing codes after a fix or getting out of derate...
