…..
Guys with trailer not hooked up . Everything on tractor works fine . Issue occurred with trailer hooked up
Hey guys 06 Columbia. I’m having issues with my right blinker staying on with headlights. So when I turn on the passenger side turns/blinkers stay...
2006 C13 acert motor . I’ve been back and forth to the cat dealer and my mechanic . The code that pops up is for the intake valve actuator oil...
I had the same issue. Went throug 3 starters within 5 months . Replaced the batteries and solenoid on firewall the last time I did the starter and...
Hey guys . Truck started shaking on highway , pulled over and it was just a misfire . Took to shop just now and code is reading misfire cyclinder...
[ATTACH] [ATTACH] I was told by mechanic that piston in transmission is bad (circled see picture). I just bought a new valve but the one in my...
it’s leaking in lo out of the bottom of the l shaped solenoid . Almost like back pressure .I’m assuming that there is dirt/rust built up around...
Eaton 10 speed leaking air out of solenoid when in lo range . Does not shift . When in high range 6-10 gears work. L shaped solenoid is getting...
Pulled the emergency gland hand and still nothing . Are the trailer valves at the air tank universal for all trailers ?
Thanks , I’ll try this! Lines are hooked up correct , if they weren’t I wouldn’t be able to move ♂️. I’ll have to also adjust the brakes this weekend
Problem with my trailer brakes. Parking brakes do not work when set . But Trolly brake are working on the trailer . Getting air at the gland hand...
Hey guys I got the fill plug out will my impact gun but having a hard time with drain plug . Any suggestions? Plug is also starting to lose its...
yes got it fixed . Pin didn’t want to come up no matter how hard I would pry it . So I had to drill remaining of switch with a large drill bit ....
If your talking about the ball at the end of the the switch. No I haven’t . I don’t know if that’s what’s sticking out or it’s still in there
Is the piece I circled part of the switch or the transmission. This is what I’m trying to figure out . Any help would be appreciated
That’s what I did but it made matters worse . Now I can’t get it into gear
[ATTACH] [ATTACH] [ATTACH] Long story short - reverse light switch broke inside Eaton 10 speed , went the ez-out route . Now the shift won’t go...
[ATTACH] [ATTACH] Guys so I posted the pictures on the 2nd post . The interior parts of the switch (spring and stem) (see pic below) I got out. I...