thank you. It’s going to be a must for next year. While the 12k axle I have now is in really good shape it is starting to bow under a 14 yard...
Good place to buy the complete axle and boxes? I’m going to do the conversion on mine this winter.
Alright I’ve been able to work on this a little more recently. Here’s where the project is at today. New Parts: Ac high and low side pressure...
Is that an old slumberger truck? I have a 365 over the road truck that was converted to a dump truck. How do I tell what size axle is under...
I put the machine back on it and after charging and running it, low side pressure is at about 90psi so almost equalized with high side. Going to...
Have a 2001 Sterling with an N14 cummins. The fan doesn’t kick on at idle which causes overheating. It doesn’t kick on while driving until the...
Fan doesn’t seem to be kicking on. Manual switch isn’t turning it on either. Pulled the harness off the pressure switch and the fan still does...
How do I get there??
I’m wiring in the easy jake brake switch on my 09 Pete 365. It’s moved the switch on the dash to the shift column. Directions say there will be a...
09 Peterbilt 365 not blowing any air to defroster. How do I access this blender door motor? Sounds like it’s in the middle of the dash?
Hello all, Bought an 09 Pete 365 dump truck with the C13. So far it seems to be a very nice running truck despite what I’ve heard about C13 in...
Wound up taking it to cat. Pump is good but 5 out of 6 injectors are bad. Leaking diesel into the crank causing oil to thin out enough to make...
Have a 2007 peterbilt 337 dump truck with the cat c7. Starting to develop a bad stutter when under heavy acceleration or going up a hill. No codes...
Nice, all new engine mounts need to be welded in I assume?
I know this isn’t a heavy duty diesel question…but the windshield wipers on our Peterbilt 335 won’t sit all the way down when off. They sit more...
I believe mine is the 460/1650. It fried a few months ago and sent it to Midwest ECM repair. I asked him to jump it up to 525 and he told me that...
Would like to give my 01 N14 CP a little more fuel, safely and possibly upgrade turbo. The engine is a 475hp model. I see manifold and turbo...
Steering gear box correct and there is two. Should have proof read. Rebuild kit or just just buy new pump?
Have a 94 international 4900 dump truck with tag axle. About 5 loads in the power steering seems to taper off until there’s nothing to turn...
Could I do the opposite and run power through the fuse side and use a test light to determine if the broken wire I suspect is for the temp sensor?
