Got fixed wasn't going thru connecter in wiring harness by stater had to splice a wire over connecter
I stopped for a couple hours the other night 0 degrees truck running no lights on. going to take off put the headlight switch on no headlights or...
Are there any tunes or mods for n14 for better mpg. Doe's a fass system help?
You go to court waste a lot of time and money. You feel so good when the other guy doesn't show up the judge gives you everything you want. Then...
Which is better in reliability,fuel mileage,cost to fix in the 08 to10 year frame.
The spring in the pump is to bypass the pressure if the 2nd fuel filter plugs, it should be higher relief pressure than the valve in the filter...
I put a tel tec not sure that's right spelling, didn't work when I put it in but they had sent me one for 06 instead of 07 kenworth but I called...
Why couldn't you take the pipe from the egr valve and run it back to the exhaust pipe instead of to the intake? t
I bought the heavier spring from cat for the pump and a new relief valve in the filter housing and still only 80 lbs pressure. I have a davco...
I wanted to put the other muffler inside the stock one which is 13" in dia.
Was wondering if you could cut the end of the muffler on a 07 t600 and stick a flow thru in there and weld it back on or are there a bunch of...
The teltik gauge I got says it is supposed to just plug in for the power source then run the wires up for the gauge. So you just pull down on the...
I'm putting a fuel pressure gauge in my 07 t600 and I'm trying to get to the gauges I took out the three screws by the windshield thinking that...
I really would like to go this route also but it's the frieghtliner thing holding me up. Are you going to go with a tag?
The handle is there. I want to put a load gauge on the dash where the knob is and then I can use the air line they have running down to the...
I bought 07 werner t600 they have an air cylinder to unlock the jaws [not the slider] I was wondering can I just take the air cylinder off and...
How many rpm will I drop if I go to tall 22 instead of low 22?
I know it probably been discussed before but nothing comes up on a search. Looking at a 07 kenworth with a 435 msx c15. What I was wondering does...
I know the o8 cats have there problems, but can they be made into a good reliable motor. I can live without the dpf if you can get rid of it or...
Looking at a 06 with mxs cat anything different, good, bad?
