Reed valve
Does it have the box with the reed vale in it mounted to the engine block? Follow intake piping backwards from the compressor to the intake. Maybe...
I run Stihl brand bar and chain oil on the fifth wheel plates. Nice and tacky, non synthetic in orange bottle. Have used it for many moons. A...
File it off flat, flush out tube, reassmble, flush system, hope for the best. FYI, One of mine had a pinhole leak on the tube to flange
I hate to tell you now, but on that oil cooler you make up a plate to pressurize it before its taken apart. Then you can dunk tank it to verify...
Here you go, sorry about the doubled pic, it said error, so i sent 2x
[ATTACH]
[ATTACH] [ATTACH]
Sorry, was out of area with a load, will check in am
If you had a bad ground, you would have lots of off the wall wierd things going on. You can unplug connector to caps pump. Gently probe on non...
Possible issues are, bad grounds, air in fuel, high inlet restriction and high inlet fuel temps, stator plate leakage, injection control valve, do...
Just a little to much advance in the timing valve open. Kinda similar to much advance in a B model. The clip "rattles" off...
You have something near or touching the frame? Buzzing feeling that would put your feet to sleep? Check everything near framerails, exhaust, oem...
Does it do it bobtail? With trailer on? Spring ride front end or air ride? How about when you are pulling hard even at lower speed. Does it have a...
Kinda like 200146 on the I 80 site, but was solid (FLAT) around the outside prerimeter, you could not see the plate thru links, and had the full...
Looking for the old school ones, Thanks anyhow
