Phase 2 diesel in Newburgh is real good. He's a certified cummins shop but works on all makes. He did a lot of work on the Cats for my last...
I pull a tri-axle dump trailer. It's permitted for 107k, so no 80k isn't what all trucks gross
You can re-bend it. If he has access to a loader or excavator. He can push it with that. A guy I used to drive for had me back my loaded truck on...
Because that's the general interstate rule. Without getting into all the different state weight laws and permits.
Use plywood. Just make sure you screw where the ribs are so the screws don't go through the gate.
Not to mention, if the steer has 20k on it the drive would be much higher.
Anyone wants what I'm hauling can have it. [IMG]
I wonder if they had these kinds of conversations when they went from 2 stick transmissions to air shift?
This is NY regs for lift axles. The dates have been extended to 2020 but rules are the same....
This isn't entirely correct. You can have the switch in the cab to lift the axle. Its the valve to adjust the air pressure in the lift axle that...
I though that was how Mercedes ran.:biggrin_25525:. Have you pressure tested the charge air cooler?
What kind of engine braking does it have? Does it use a compression release or an exhaust brake? How do you like the disc brakes compared to drums?
My 04 379 has factory grounding for the mirror brackets, to the chassis. When I checked mine it has no resistence from bracket to frame. I would...
Wish I saw this yesterday. I run to Albany all the time, came by there this morning. Could have at least gotten you to Newburgh today.
They are big with the MTA in NY. Company called Ray's out of Newburgh does a lot of recycling of these
My 6nz has the same decal. Carb had emissions regs back then too.
The manufactures don't recommend it. Most professional guys use them because they cut faster. I use a 6000 rpm 7" grinder with zephyr wheels and...
I don't have a preference. The truck I run now has duals. My last truck had a 385 single and Ive run ones with a 315 single. I don't notice a...
Got the new antenna and coax mounted yesterday. Went with a k40 trucker style and k40 mini8 18' coax. My swr on 19 is 1.1. Radio seems to get out...
So I got all the issues worked out with the swap. Have about 1500 miles on it now. What a difference between an acert and this. My old bxs was a...