Learned a lot during this process. It all makes a lot more sense now. Thank you all for the help. After getting a test light and doing some more...
No voltage at the compressor with it being jumped and it takes a bit of strength to spin it
No sound from compressor when jumping those two
I don’t hear any sounds when jumping those pins
Which two pins am I jumping across. Sorry, still trying to learn this stuff.
Small update is the fuse on bottom right for ac when checking, it the relay on the bottom left clicks. I checked the pins on that relay and got 14...
I’m not sure I’m following you on this one.
I’ll grab a test light tomorrow, silly I have a multi meter but not one of those. I got the compressor from Peterbilt and it would really let me...
This may be silly enough. But is there a test for the ac on/off switch inside the truck to verify it’s getting power and sending power as...
attached is a picture of my fuse panel. Something seems to be off. The only relay that I feel click when I press the ac button on/off is the one...
if not I’m he Oh boy. Well I appreciate your help with all of this. I’ll let ya know what it was when I figure it out. If I don’t figure it out...
That’s what I was hoping for at this point. Tomorrow im going to remove all the wire from the loom from the compressor all the way to the firewall...
The new pressure switches were installed correctly, the only one you can really mess up is on the high side you have the one on the firewall and...
Yea lines were blown out, I recently read some people claim of the citrus smell just kind of being there for awhile so maybe what I purged out of...
system was flushed both times I repaired it. First time was just the lines themselves since I replaced all the hard parts (condenser, evaporator,...
I ch I checked all the prongs and they are good. I will check to see where the thermostatic switch is located.
Part of an additional problem I have is that the fuse panel cover was not there when I bought the truck. The one I’ve been using for reference is...
well I swapped the wires and still no go. As a side note I learned how to test relays, all the relays measured about 76 when measured across the...
ill give that a shot. Thank you.
The sleeper lines were disconnected and capped off by the previous owner. So I haven’t bothered with adding that system back on.
