I’m not sure what nozzle you’re talking about? Maybe it’s because the end of the cam I’m using is marked 310? That was just to identify what it...
And with the addition of the dwell time at the bottom and being a lower RPM range that I work in, I no longer need the top end like I used to run...
All that you've mentioned are the same thoughts and concerns I have. I can't go back now, as I already have the Big Bore Kit in Hand. [ATTACH]...
I wonder If I could use a stronger Material to make Rocker Shafts?
What W923 said is good solid advice in detail.
I'm aware of Fair Valley, Spoke with them today for a while and they didn't seem interest in Big Cats.
Thanks for the heads up, I was only considering honing injectors if necessary
That's nice you're able to dyno your success. There used to be a Detroit shop locally that used have a Dyno but when the new owners took over...
I was just talking to Joe @ Scheid Diesel today about those feed holes. I had asked him If they have ever enlarged them. His comment was that they...
As I said earlier regarding Cams (I wouldn't know where to start) The idea is to find a cam that may possible work best with the added stroke and...
I missed your post earlier whenI was responding to W932 Mark M formally from Columbus Diesel and I are going to talk later this evening when he...
@wore out The potential lack of fuel Issue. I think the best that I maybe able to get is going to be 350-400cc with rack stop modifications and...
Thanks for the input. Do you have any photos of the support stands you made, I like this idea and will be looking into it. Just need to make sure...
@wore out As I mentioned to Oxbow, there’s not A lot of information On the web. The diesel garage at one point had a lot going on, but I see over...
@Oxbow I guess I could say that I’ve always had a passion for the earlier 3406B-C models and going back to the 90s when I had my first 379 with...
I know by increasing the displacement with the Bore and stroke. The limitations are in my fuel delivery. It has been quite sometime since I’ve...
yeah, for the Injection pump I will be using the C model with the cam driven lift pump Removed and a block plate Installed the appropriate check...
With the way, the younger generation is today with phones, welded to the hands and doing TikTok reels. I don’t think they’ll mind at all having...
I'm not familiar with the ECM CATs, but thanks for pointing out that they all rum the same profile. So is it in the injection lobe where they make...
Thanks for your time. To address the deflection, I was going to see about possibly getting heavier push rods and heavier dual springs to stay in...
