Had a Pete with an N14 in it that I sold for a KW with a Cat...6NZ!!!! (I know, everyone on here has a hard-on for a 6NZ!!!). So far, I'm not...
Is there a way to make the tilt column tilt back more in an '02 KW..??
See if the picture via iPhone works..
Got a 96 East all-aluminum flatbed now that's 48x96. Would like to upgrade some, especially to 102" wide. Seems there's an enormous price spread...
'02 T-800 with 62" aerocab flat-top...c-15 and '96 (yep its old) East all-aluminum flatbed...28,400lbs. 180gal of fuel, roughly 50 gal of hyd oil...
Charge an amount that you'd like to see the truck make in an 8 hour time frame. So if you want $800/day, charge $100/hr. Since you didn't get...
So what's an acceptable oil pressure drop when under full throttle? Mine will lose about 2-4lbs, going from 70 to about 66-67 around 1,400...
Do any owner/operators on here belong to them, or did at one time? Would like to hear from people who have one or two trucks and are based in...
I didn't dig too hard, just snooping. Said it was everything - pipes, elbows, clamps, cab brackets, yada yada. I figure by the time I piecemeal...
I see yours has the exhaust behind the cab, mine has dual pipes on the side of the cab...with the fancy pants s-curved elbows. I have snooped...
I have an '02 T-800 with a 62" aerocab sleeper. It has the sleeper extenders and I would like to remove them...how big of a PITA is it to do it?...
It's all standard stuff for the most part. Just make sure you have impact sockets for your impact wrenches. Some good trouble lights....
The air-trac has trac bars on each corner of the axle, under the leaf spring...to preserve alignment and handle the torque instead of just a leaf...
2000 Peterbilt 378 daycab. 195" wb. N14 Cummins 525hp. 18 sp. 2 line wetkit, no tilt 5th wheel. Electric tarp and air tailgate control in...
That's why it was replaced...there were small metallic particles in it (aluminum?).
Could you elaborate on the 'other things'...??? The orifice tube has a screen on it and there was some debris on it, so he changed that...then...
I bet there's a good story to tell there...LOL
Could a restriction within (internally) an A/C condenser cause the pressures to build slowly on an a/c system? I've been having issues with my...
My brother had that issue with his Cat powered Peterbilt...ended up being a bad coolant temp sensor. It would cause the fan to cycle constantly,...
I like the 18sp for what I do anyway...putting around rock quarries and most of them you have to go loaded up from the pit...4th gear is too slow...