They're just moving the axles forward and cutting the rear of the frame off. Good idea on placement of the 5th plate. Now if only I can loose...
Thanks guys! I was going to do it even if it didn't save any weight, just so it's easier to move around the smaller yards. I'm also planning on...
Hey everyone. I've been thinking about shortening up my '87 T-600 that had been daycabbed before I bought it. It's got a 230" wheelbase, and all...
I'm thinking the same thing with my '87 T-600, the air motors are leaking like a sieve and no air motor is a good motor. Will be following this...
Got the centramatics, XZA-3s, and a good alignment, and my shimmy is GONE! Thanks for the help guys!
Was leaning towards a pair of XZA-3s with centramatics, but we'll see what the tire shop says today. Thanks everyone, sure appreciate the input!
Also, what is the best steer for a mix of gravel/blacktop? Do some hauling for the elevator during the winter as well, so I figure I should get...
Do those centramatics work? I was just looking into them as you posted. I think I'm going to call Kenworth of Fargo and have them alignment all 3...
I tried that this afternoon and had no movement in the kingpins. I'm going to have to pick up a couple steers for it and have it aligned. The...
Hey everyone, I got my T-6 back from the shop, said they fixed the problem of my intermittent shimmy, but they didn't! (I didn't realize until I...
Thanks everyone, I've got to call the shop today and see what they've come up with. Flaten And Johnson in Mayville have serviced all of our...
It's a RTO-11613, if that helps. I've got the shop looking at the air regulator...
Congrats on the purchase, sounds like a nice truck, and a good motor. One thing about the L10 is it is a SMOOTH running motor.
It grinds regardless of throwing the switch in neutral or from 4th going to 5th. When I get it to a truck place I'll have them check up on the air...
Nope not thinking the trans has ever been rebuilt or replaced. Just bought the truck this summer, and it just started grinding when I was hauling...
My 300 was dynoed at around 335 after only having the fueling turned up. I would think with a bigger turbo and other go fast goodies it'd be able...
I'll go through most of the wheat harvest (2500 acres) on one 150 gallon tank of fuel, and that's with alot of idling and 10-20 mile runs to the...
So I'd be looking at about a grand to get it fixed or so. Well, I guess I got the tractor cheap enough I can put a little money back into it. Will...
An L10 is a very forgiving motor, wideish powerband and really good on fuel. I run one in my '91 T-600 with a 9 speed on the 40' timpte hopper,...
Is that pretty expensive to have fixed? My '87 T-600 with the eaton 13 grinds just terrible from high back to low, would like to get it fixed...
